Annual service · NFPA 10 §7.2

Annual fire extinguisher inspection and tagging

The yearly service that puts a current, punched tag on the neck of every portable unit in your building. This is the one a fire marshal reads first.

Hamilton Fire ProtectionANNUAL

Inspection and tagging

NFPA 10 §7.2
EVERY 12 MONTHS
Performed byLicensed technician
Price per unitQuoted per site
What the service includes

Every unit gets the same checks

StepWhat we check or replace
Pressure gaugeNeedle read in the operable range, gauge face and lens checked for damage.
Pull pin and sealTamper seal intact, pin free, replaced if broken or missing.
WeightUnit weighed against the stamped charge weight to confirm the agent is present.
Shell and hoseCylinder checked for dents and corrosion, hose and nozzle cleared of obstruction.
PlacementMounting height, signage, and travel distance checked against the hazard class.
Label and tagInstruction label legible, new tag punched with month and year, signed on site.
ABC dry chemical extinguishers on the Hamilton Fire Protection bench during service
Who performs it

A technician licensed by the Texas State Fire Marshal performs and signs the annual. Your own staff cannot punch the tag.

Technician licenseType B, portables only
If it lapses

What an inspector sees

An expired tag fails on sight. It is the fastest finding an inspector can write and the first thing an insurance carrier asks about after a claim. The tag also carries the punch date, so a lapse is dated evidence rather than a judgement call.

Read the compliance guide
Applies to
All portable extinguishers
REQUIRED
Units in storage or spares
REQUIRED
Fixed kitchen systems
NOT SERVICED
Interval from last punch
12 MONTHS

Send the site address and unit count

A written quote comes back before anything is scheduled.